Not Available in New York.
QT, Gloss, Honey Pine, Polyshade.
Offers long-lasting beauty and protection on both finished and unfinished wood. Use for glass-smooth finish on woodwork, cabinets, furniture, doors and floors. Application tools: natural bristle, foam brush or lambswool applicator. 24 hours drying time and covers an area of 125 sq. ft. per quart. Easy clean up with mineral spirits.
Zar, QT, Rosewood, Interior Wood Stain, Wipes On To Produce A Uniform Color, Can Be Applied to Metal Or Previously Painted Or Varnished Surfaces To Achieve A Wood Grain Effect, Ideal Stain For Fiberglass, Steel Or Masonite Doors, Covers Up To 800 SQFT.
Gallon, Sandstone, Silicone Acrylic Concrete Stain & Sealer, Exterior Use Only, For Staining Concrete Surfaces Such As Driveways, Patios & Sidewalks, Protects & Preserves, Also Used For Decorative Finishes, Not Available To Members In VOC Restricted Areas, Those Members Can Order Tint Bases To Mix The Color.
TUDOR BROWN Original Briwax 1 lb. Cleans & reconditions wood, metal, leather, fiberglas, marble and tile. Retards oxidation, tarnish, mold & mildew. Stains, seals, and finishes new wood in one easy step. Leaves a beautiful wax finish. Contains Toluene. Color shown on two surfaces. The square box on the left shows Briwax on light wood, same color Briwax on a white panel to the right.
These wick type dye markers are ideal for touching up finishes that have received scuffs and light scratches during moving or handling. The markers feature excellent flow and adhesion to most surfaces and are resistant to polishes, offering durability for quality repair work.ORM-D (Due to freight restrictions, this item can be shipped via UPS Ground Service only)Warning! Due to differences in individual computer monitors, the color above is only a guide and may be different than the actual result.
SILVER LEAF Rub ‘n Buff.1/2 fl. oz. (15 ml) – Covers up to 20 square feetRub ‘n Buff is a wax base metallic finish that is formulated from imported carnauba waxes, fine metallic powders, and select pigments. It can be applied to any clean, dry surface as well as over previously painted surfaces (sample done on Black Finish).Easy to Apply: Squeeze the tube gently until finish appears at tub opening. Pick up a very small amount of Rub ‘n Buff using fingertip and rub it evenly in a gentle rubbing motion, rather than strokes, over smooth surface or raised designs. Rub ‘n Buff dries in a few seconds. Buff with a soft cloth to acheive the hand-rubbed, lustrous finish.
8 fluid ounce CanRestor-A-Finish is a unique finish-penetrating formula that restores the original color and luster to the finish while blending out minor scratches and blemishes. Permanently eliminates white heat rings, water marks, scratches, color fade, oxidation, smoke damage, etc. Cleans the surface and restores the finish in one step without removing any of the existing finish.ORM-D (Due to freight restrictions, this item can be shipped via UPS Ground Service only)Warning! Due to differences in individual computer monitors, the color above is only a guide and may be different than the actual result.
Oil-base stain penetrates, stains, and seals wood surfaces. Use to enhance any bare or stripped wood surface such as furniture, woodwork, doors, floors, cabinets, and accessories. 8 hours drying time and covers an area of 125-150 sq. ft. per quart. Not Available in New York.
LastnLast Professional Quick Dry Sealer Will Penetrate and Seal Wood Quickly. When Used With LastnLast Floor Finishes, this 100% Urethane Formulation Will Provide Commercial Quality Durability.
– Formulated to reveal wood’s beauty – Style: Traditional Pecan No. 218 – Size: 1 Quart (946 mL) – Varathane Oil-Based Premium Wood Stains are formulated with a unique base for deeper penetration and premium pigments for clearer color. This results